How to adjust a Holley 2300 carburetor

I checked the secondary side throttle blade adjustment( have to On the primary side, how much of the idle transfer slots can you see?

How to adjust a Holley 2300 carburetor If you are doing this adjustment on the vehicle, you should see about an18 of the idle transfer slot above the throttle butterfly plates If you don't

I checked the secondary side throttle blade adjustment( have to On the primary side, how much of the idle transfer slots can you see?

slot scheletri When I set up my carbs on my RB stroker, the Holley site recommended drilling a small hole in the throttle plate to get more air in while

With the Quick Fuel carburetor in place, we discovered that the transfer slot was uncovered by inch to create the desired idle speed But

holley transfer slot adjustment I drill them to 070 and make sure the holes are drilled on the same side of the plate as the transfer slots, and idle air holes Usually about

While the carb is off adjust the throttle plate so roughly 040 of the transfer slot is exposed (the slot should appear square once this is